Altezza BEAMS 3S-GE DUAL VVT-i

vikey3 — Tue, 14 Sep 2010 20:27:17 +0000

DIY
Project 1: How to Clean Your Mass Air Flow Sensor (MAF)
Project 2: How to clean the throttle body
Project 3: Reset the ECU
Project 4: Changing the brake pads

Project x: Other links

Project 1: MAF Sensor Cleaning

Why:
- To improve fuel efficiency
- To get over problems like bunny hop
- To get over rough idle time

How:
1. Open the ‘nut’ connecting the Air intake
2. Remove the half of the Air intake
3. Locate the MAF filter attached to the other half of the Air Intake system
4. Remove the two philips screws that secure the MAF to the Air intake
5. Unplug the wires from the MAF filter.
6. Place the MAF filter on a cloth and use the ‘CRC – Mass Air Flow cleaner’ to spray and clean the filter.

Project 2: Throttle body cleaning

Project 3: ECU reset

Project 4: Changing the brakepads

Project x: Other links

DUAL VVT-i vs VTec

Useful Links;

http://www.toyota.co.jp/Showroom/All_toyota_lineup/Altezza/mechanism/index.html

http://www.beams-redtop.com/vvti.htm

Protected: L!nKs

vikey3 — Wed, 25 Feb 2009 11:06:33 +0000

This post is password protected. You must visit the website and enter the password to continue reading.

Vik's Blog

Altezza BEAMS 3S-GE DUAL VVT-i

Protected: L!nKs