Altezza BEAMS 3S-GE DUAL VVT-i
DIY
Project 1: How to Clean Your Mass Air Flow Sensor (MAF)
Project 2: How to clean the throttle body
Project 3: Reset the ECU
Project 4: Changing the brake pads
Project x: Other links
Project 1: MAF Sensor Cleaning
Why:
- To improve fuel efficiency
- To get over problems like bunny hop
- To get over rough idle time
How:
1. Open the ‘nut’ connecting the Air intake
2. Remove the half of the Air intake
3. Locate the MAF filter attached to the other half of the Air Intake system
4. Remove the two philips screws that secure the MAF to the Air intake
5. Unplug the wires from the MAF filter.
6. Place the MAF filter on a cloth and use the ‘CRC – Mass Air Flow cleaner’ to spray and clean the filter.
Project 2: Throttle body cleaning
Project 3: ECU reset
Project 4: Changing the brakepads
Project x: Other links
DUAL VVT-i vs VTec
Useful Links;
http://www.toyota.co.jp/Showroom/All_toyota_lineup/Altezza/mechanism/index.html
http://www.beams-redtop.com/vvti.htm
